Steelstrip Processors
  
 
 
Main Pages

 

Technical Links
Useful Information Sources

 

Heat Treatment
 
 

 

 

 

The following companies undertake the processing of steel strip on a contract work basis. The services they offer include, pickling and oiling , slitting, de-coiling, blanking and heat treatment

   

The first listing covers steel slitting, decoiling, pickling and blanking

Company Address Telephone number /fax

Facilities

Website/email

Servosteel Pensnett Road, Dudley, West Midlands, DY1 2HA 01384 471370 

pickling, wide slitting, narrow slitting and de-coiling.


Independent Slitters Church Bridge, Oldbury, West Midlands B69 4LQ 0121 5529628     

Paramount Roll & Forming 12120 E. Florence Ave.
Santa Fe Springs, CA 90706

 
01 5629446151

Steel Rolling and bending


Precision Strip Ltd Park Lane East, Tipton, West Midlands DY4 8RF 0121 522 3428

Edge Dressing


P & H Services Bay 1,Park Lane East,Tipton
West Midlands DY4 8RF
0121-557 1455

Edge dressing, straightening, deburring

 

Banding and Strapping   01384 232344

narrow slitting and decoiling

 

Reddifast Steels

Unit 3, Charlton Drive Corngreaves Trading Estate
Cradley Heath, West Midlands
B64 7BJ
01384 636663  

The following companies offer heat treatment, and laboratory services

ADI Doranda Way
West Bromwich

 
0121 525 0303

Austempering and annealing service to iron foundries and steel parts manufacturers

Heat Treatment 2000 Brandon Way
West Bromwich
West Midlands
0121 526 2000

Hardening, Tempering, Case hardening, stress relieving

Servosteel

Tel: 01384 394661

Fax: 01384 440208

 

Pickling and Oiling

Pickling is a treatment applied to the surface of steel strip to clean and remove the scale that is an inherent feature of hot rolled steel strip. This is achieved by the use of acid which is subsequently washed to stop ongoing chemical action. Oil is then applied to protect the surface of the strip from oxidation

Slitting

The commonest method of slitting steel strip is known as "shear slitting". In this method the steel is cut by the operation of two rotary knives that operate as a scissor. Some excellent information can be found here courtesy of the Carolina Knife Company who are manufacturers of machine knives.

Decoiling

The decoiling process involves the unwinding of steel coil. This is passed through roller levellers and on to a flat bed where the material is cut in to strips or lengths.

 

Heat Treatment of Steel

The heat treatments offered by steel producers are normally a feature of the product ordered. The subject is far too broad to cover here, but the following links may prove useful.